E101 Concrete Crack 2:1 Epoxy Injection Paste
E101 Injection 2:1 Paste 450 ML cartridge
Used for large concrete cracks, 100% solids, moisture insensitive epoxy resin, which has a unique high modulus of elasticity. It is formulated to meet ASTM C-881 cured property requirements.
It has non-flowing characteristics in the uncured state. Thusly, it can be injected into larger cracks (greater than 1/4 inch wide) in walls and slabs without flowing out of these cracks. Even though the E101 Crack Injection 2:1 Paste will not flow after injection, it is formulated without fillers so that it can be easily injected into a crack even with a manual dual-component dispensing tool at under 50 psi of force (using a 1/2x24 static mixer).
USES of Injection Paste
- In large wall cracks to reduce the chance of product leaking out, butter-like viscosity
- In large cracks where carbon fiber will be used later as a reinforcement.
- As an anchoring epoxy paste
- As an epoxy grout
- Compatible with other viscosity of epoxies
Specifications
PHYSICAL PROPERTIES AFTER CURE OF 14 DAYS @75ºF Tensile Strength, psi
ASTM D-638 8500 Tensile- Elongation, %
ASTM D-638 modified 2-4 Compressive Strength, psi
ASTM D-695 12000 Compressive Modulus, psi
ASTM D-695 (28 days) 500000 Shear Strength, psi
ASTM D-732 5100 Deflection Temp. @ 264 psi
ASTM D-648 126ºF Bond Strength, psi ASTM C-882 2800
Packaged in Dual 150x300 ML Tubes supplied with nut, static mixer, Dispensing tool required.
It is recommended to Pre-Heat Epoxy Paste
Contractors with special pricing must Purchase retaining nut and static mixers separately.
The Mixer recommended for this 101- paste Epoxy is the 1/2x 32 static mixer or 3/8x 24 static mixer
2:1 ratio 450 ML application tool
Category List
