Carbon Fiber Stitch Staple and Epoxy 8-15 ft Ultimate Repair Kit

Ultimate Epoxy Injection & Carbon Fiber Stitch Kit
The Ultimate in Structural Concrete crack repair
*10 Carbon Fiber Stitch Staples
* 1 Epoxy Dual Tube of Fortress 4000
* 3 Dual Tubes of MV Injection Epoxy
* 1 Dual Tube of Port setting Epoxy
* 15 Surface Injection Ports
* Static mixers for Epoxy
* 4 Pair gloves & putty knife

Including Epoxy Dispensing Tool
* Feed Hose
* Wire brush
* Safety Goggles
* Flash drive & Written instructions
* Recommended that you have a hand grinder with a turbo zip blade to cut slots for the stitches.

A combined kit of epoxy injection and Carbon Fiber Staples, complete kit for up to 15 ft of wall in an easy to use kit. Repair foundation structural cracks using Carbon Fiber Staples and Epoxy Injection provides the best solution for a permanent and long-lasting repair.  Structural cracks in concrete are caused by movement in the foundation, thus resulting in long-term creeping and fatiguing of concrete. Crack repair by injection alone may not be a permanent solution. Epoxy injection in structural crack repair is a suitable first phase, this kit also provides the use of Carbon Fiber Countersunk Staples providing the necessary reinforcement. By cross-stitching with Countersunk Staples within the foundation crack area, creep and fatigue is eliminated and improves the long-term performance of repair material. Carbon fiber has proven to be a safer and more effective product for structural reinforcement than steel. Countersunk Staples, when installed, lay flat against the foundation, leaving the wall with no obstruction and ready to paint.
Enough product to inject a crack 1/8 wide 9 ft long
Download Cabon Fiber Staple Installation instructions
Kit Epoxy for injection volume is 1800Mls
Crack volume = 1/8in wide 1 ft long 10in thick wall uses 240Mls per ft
Crack volume = 1/4in wide 1 ft long 10in thick wall uses 480Mls per ft