Shipping & Tariffs USA
Tariffs All orders are subject to $34 Min fee :US Government Import fee per shipment.
In rare cases, additional U.S. import duties may apply depending on customs processing.
UPS 5-9 days : Tiered by cart value.$52-$65 : Shipping including Tariff.DHL UPS 3-4 days : Tiered by cart value..$75-$125 : Shipping including Tariff.
Final shipping calculated at checkout.
Assembled in Canada with U.S. and global materials
Final shipping calculated at checkout.
ULV Epoxy Crack injection kit for Ultra Small concrete cracks.
Auto-Injector series kit. Ultra-low Viscosity Epoxy Kit for any cracks less than 1/64
The NextStar Auto Injector series of products allows for low-pressure injection between 24 to 40 psi without any specialized manual or pneumatic tools at a low cost but with the same professional results. These kits are perfect for homeowners and professionals alike who only do occasional or one-time repairs. Ideal for the DoIt Your Self project. No Digging is required. All injections are from the inside! This Epoxy is slow curing and super thin to allow penetration of cracks that may not even be visible. The auto-injectors allow for constant injection pressure over a 24-hour time frame to penetrate the smallest of cracks. No special tools required.
Uses: Ultrafine Cracks in Cracked Concrete walls. Ultrafine cracks- pinholes, repair of leaking snap-ties, gravity feed, any cracked concrete item including concrete statues, etc
946 mls (1 Quart) of ULV Epoxy Part A and 473mls (1 Pint) Part B ULV Epoxy
Two 10 oz 300ml jars of fast setting Epoxy Crack Seal Port Adhesive (1 jar Part A, 1 jar Part B)
15 Surface ports with Autoinjectors ( provides the same results as professional injectors)
Six wooden sticks & putty knife
Safety glasses
Two pair of nitrile gloves
Wire brush
Complete instructions & MSDS Data
Our 10 ft. concrete crack repair kit allows the D-I-Y homeowner or handyman to use the same materials that we supply professional contractors.
VIDEO
Watch Directly on Youtube
FAQ Auto-Injector kits
What is different about auto injector kits? What are the different types of auto injector kits When would I use these types of kits? Why inject ULV epoxy? How long will the foundation repair last? How long will a standard crack repair take? What are the steps for a repair? Does NextStar provide help if I have a problem?
Q What is different about auto injector kits? A The auto injector kit series of easy-to-use kits that give professional results. Using NextStar’s unique auto injector allows products to be injected under low pressure into concrete foundations without specialty injection tools and costly equipment. Q What are the different types of auto injector kits? A Type 1 is our standard polyurethane and can be used in most leaking foundation cracks from 1/32 – 3/8 inch wide. Type 2 for leaking cracks from 1/64 to 1/32 inch. (this kit) is our Ultra Low Viscosity Epoxy kit that penetrates the smallest possible concrete cracks that could not be injected with polyurethane even under high pressure. Q When would I use these types of kits? A The auto-injection kits are perfect for the homeowner or contractor who only QWhy inject Ultra-Low Viscosity Epoxy? This Epoxy is perfect for injecting into foundation cracks that may or not be leaking but too small to inject polyurethane. This Ultra Low Viscosity Epoxy is can flow for up to 12 hrs and when used with auto injectors the low pressure can be applied automatically over an extended time without human help. Epoxy provides the structural repair. Q How long will the foundation repair last? A These type of repairs typically can last the life of the structure Q How long will a standard crack repair take? A 8 ft of foundation cracks should take with ULV Epoxy is 4 hrs or less even for a novice. The epoxy will continue to flow for up to 12 hrs with a cure time of 72 hrs .Q What are the steps for a repair? A Q Yes we provide telephone support via toll-free at 1-866-445-3984
Video instructions
Category List
