Concrete Crack Repair
The repairing of structural deficiencies and/or concrete wall seepage as a result of foundation cracks is a critical aspect of the basement waterproofing process. Today, the most efficient and economical way to repair poured foundation cracks is with a low-pressure injection of either epoxy or polyurethane foam. NextStar provides a variety of polyurethane and epoxy resin injection materials for the repair of basement wall cracks or concrete floor cracks. For previously improperly repaired cracks that have leakage issues we have several High-pressure solutions and products. Block walls usually require an external waterproofing system but can be easily be reinforced with Carbon Fiber to stabilize the wall. reinforcement is also a method of preventing re-cracking of poured concrete walls when used injunction with . These methods are considered standard practice in the industry today. Enter Store
The Crack Injection Process
Concrete crack repair Non-Structural Foundation Cracks: Wet and Leaking
Most concrete foundation cracks are strictly leaking problems, especially during heavy rains and snow melt. Not only can excess water in the basement potentially damage or ruin valuable items, but chances for mold and mildew growth are significantly higher, which directly impacts a home's indoor air quality. Basement wall cracks also have the ability to widen. While a particular crack may not necessarily be a problem at the time, that can change as soon as the next heavy rain storm arrives. After a foundation crack forms, the prospect of water seepage (whether slight or major) is not a matter of if, but a matter of when. If water leakage from a foundation crack is minimal now, the potential exists for the crack to widen, allowing further seepage into the basement.
These basement wall cracks, resulting from shrinkage, generally take place within the first 30 days after a foundation has been poured. As water within the concrete evaporates, the concrete shrinks. When extra water is added to the concrete, it makes it easier to install for the builder. Unfortunately, the wetter the concrete mix is, the more shrinkage is going to occur, which ultimately weakens the foundation. In addition, natural settling of the foundation also leads to concrete cracks.
For wet and leaking concrete foundation cracks, the preferred injection material is polyurethane. Polyurethane foam is a flexible material that easily injects into the crack. Upon contact with water within the crack, polyurethane foam reacts by expanding throughout the void, thus filling the crack. For structural defects epoxy is injected to effectively glue the concrete back together.
NextStar Products shipped US & Canada
- Concrete Foundation Crack Repair
- Contractor - DIY supply
- Structural Epoxy Systems
- Polyurethane crack injection
- Stabilization with Carbon Fiber/Kevlar
- High Pressure Crack Injection
Structural Foundation CracksStructural cracks can be reinforced and stabilized with the use of carbon fiber Staples- Stitches and grid straps preventing further cracking.
National 866-445-3984 US & Canada