NextStar 121 Epoxy 1:1 Medium Viscosity
Nextstar 121 MV is a two-component, 100% solids, moisture insensitive epoxy resin system which has a high modulus of elasticity. 121 Epoxy 1:1 MV is formulated to meet ASTM C-881 specifications. It is unique in that it rapidly thickens in the crack, even those less than 1/16 of an inch, so that material cannot leak out the back for more than 10-20 minutes (unlike conventional products which can flow out hours after injection). You can now confidently replace whatever may have leaked out in those twenty minutes knowing that no more can leak out, unless all the initial injection has leaked out the back of the crack within 20 minutes (unlikely to happen). This overcomes the most common epoxy crack repair failure, namely the incomplete injection of epoxy into a crack arising when material leaks out the back of a crack after injection.
Cures down to 32 deg F or 0 deg C
Best Use with Poured Concrete Wall Repair
A) Structural repair of cracked concrete by pressure injection, grouting.
B) Monolithic restoration of delaminated concrete.
C) Grouting material when mixed with aggregate.
Packaged in Dual 300ML Tubes supplied with nut, static mixer
Contractors with special pricing must Purchase retaining nut and static mixers separately.
The mixer recommended for this MV Epoxy is the 1/4x 32 static mixer & retaining Nut
Price per Dual cartridge 600mls (20.2oz) Tube set