NextStar is your specialists in concrete crack repair for foundation and slab floor restoration. Polyurethane foam, Epoxy, Polyurea, Special Urethanes and Carbon Fiber for concrete. National # 1-866-445-3984
Concrete crack repair products are used by contractors and professionals for foundation crack and slab repair. Also offering a select line of D-I-Y products to the general public. Enter Here
Premium Polyurethane foam or Epoxy injection for basement concrete foundation cracks, to stop leaking foundations or repair of structural foundation walls using Epoxy.
Preferred solutions that can effectively repair common problems with broken or cracked concrete floor slabs. Solutions for structural repair of concrete slabs including carbon fiber solutions for reinforcement.
Carbon Fiber solutions for cracked or bowed concrete structurally reinforced with carbon fiber, stronger that steel but at a reduced cost. Carbon fiber provides a modern proven solution to an old problem and easy to apply.
A combined kit of epoxy injection and Carbon Fiber Staples, complete kit for up to 15 ft of wall in an easy to use kit. Repair foundation structural cracks using Carbon Fiber Staples and Epoxy Injection provides the best solution for a permanent and long lasting repair. Structural cracks in concrete are caused by movement in the foundation, thus resulting in long-term creeping and fatiguing of concrete. Crack repair by injection alone may not be a permanent solution. Epoxy injection in structural crack repair is a suitable first phase,this kit also provides the use of Carbon Fiber Countersunk Staples providing the necessary reinforcement. By cross-stitching with Countersunk Staples within the foundation crack area, creep and fatigue is eliminated and improves long-term performance of repair material. Carbon fiber has proven to be a safer and more effective product for structural reinforcement than steel. Countersunk Staples, when installed, lay flat against the foundation, leaving the wall with no obstruction and ready to paint.
Enough product to inject a crack 1/8 wide 9 ft long
Download Cabon Fiber Staple Installation instructions
Kit Epoxy for injecton volume is 1800Mls
Crack volume = 1/8in wide 1 ft long 10in thick wall uses 240Mls per ft
Crack volume = 1/4in wide 1 ft long 10in thick wall uses 480Mls per ft