322 Seal-n-Peel Port Setting Epoxy 600 ml Cartridge

Paste 322 Seal-n-Peel port Setting Epoxy

The only surface seal available today that peels off the wall after a concrete crack repair.

Ready for injection 35 - 45 minutes after application.

Emecole 322 Surface Seal-n-Peel is designed for use as a surface port adhesive and temporary, removable surface sealer for low-pressure epoxy and urethane foam concrete crack injection repairs. It is highly recommended for applications requiring surface seal removal when appearance is important. This type of waterproof surface seal is ideal for clean-up after concrete crack injection repairs.

Using 322 eliminates time-consuming grinding, burning, chipping, and clean-up when compared to other surface seals not formulated for ease of removal. Following initial cure of epoxy injection resin or polyurethane foam, 322 Surface Seal-n-Peel may be easily removed by pulling on a starter tab (such as Drywall fiber tape) placed on the surface immediately beyond the beginning of the crack before the application or by prying under the leading edge of the seal with a trowel or similar tool.

322 Seal Paste Features

• Removable surface seal for covering cracks and bonding Surface Ports to the wall. Sealing between injection ports.
• Peels off walls. Allows for a cleaner finish and repairs that are less visible.
• Used to Seal the front of cracks, stopping injected material from leaking out. Results in less waste and loss of injected epoxy or polyurethane.
• A Fast cure time of 35 to 45 minutes allows injections to begin quickly. fast turnaround time for surface seal to cure
• Available in 600ML - 22 ounces 1:1 dual cartridges
• Mixes by hand for simple application