Slab repair product: 10 Minute concrete mender (Roadware)
Easy to use for crack and spall repair when fast high strength repairs are needed. Product can be mixed with upto 3 parts silica sand.
Product selector page has volume calculator to help determine product amount needed.
Also consider the 2 quart 10 minute mender kit as no appliction tool is needed.
Dual 300ml cartridge (22oz) with 2 static mixers / flow restrictor and retaining nut per cartridge Requires Application tool Also consider 2 quart and 1 gallon kits as no tool needed.
Shave on hand craper, silica sand (sandblasting sand) optionally diamond cup wheel with dust shroud and vacuum.
Ultra thin product that penetrates deep into concrete.
A Proffessional use product.
Roadware 10 Minute Concrete Mender, the advanced concrete repair material that is easy to apply and stays in place.
Now you can repair cracks and spalls to a smooth finish in a fraction of the time it takes with ordinary products. Roadware 10 Minute Concrete Mender is a revolutionary new two-part hybrid urethane for repairing concrete. It's nearly water thin for deep penetration and it won't pop out like epoxy because it never gets brittle. Not UV stable and will change color in sun so coating over is recommended. Use Matchcrete for outside decorative repairs.
Tube set Instructions See Video of Use
Core Sample under UV Light
showing deep penatration into concrete
*Permanent repair - doesn't pop out
*Cures in ten minutes for traffic or coating
*Quick and easy surface preparation - no saw cuts necessary
*No minimum or maximum depth restrictions
*Low installed cost vs. alternatives
*Cures in temperatures down to -20° F
*Bonds to concrete, masonry, steel & wood
*Compatible with all floor coatings
*No shrinkage - 6% elongation
*Excellent chemical resistance
*Extremely thin - low surface tension
*Cure stops at 4500 psi
*Dynamic load transfer
*May be used as a coating
*May be painted
*Trowelable when mixed with up to 3 parts sand
*Meets USDA guidelines
*Compatable use with carbon fiber tows