Medium fast setting port sealing paste Epoxy
Used primarily for setting injection ports in place and general sealing over cracks before injection.
less than 1hr set time.
Emecole 302 Port Setting Paste
|
Koster 2n1 (2in1)Resin for Low pressure polyurethane injection systems fast reaction to water but water not required to cure as a resin. Without water cures as elastic resin.
|
DIY Carbon Fiber fabric 36ft wall kit with epoxy and instructions to reinforce up to 20 ft of wall. Includes free epoxy applicator.
|
36ft 600 GSM Contractor carbon fiber fabric kit. Use for corners or irregular shaped and bowed concrete walls for reinforcement.
600 GSM Carbon Fiber Fabric kit
|
Single Component Polyurethane pump for high pressure crack injection. Contractor equipment
Single Star Component Pump
|
Koster 2n1 Resin for high pressure polyurethane injection systems with dual or single component pumps.1 Gallon Kit
Koster 2 IN 1 Polyurethane Resin
|
ICC Code Approved carbon fiber wall reinforcement kit with 75ft of Carbon fiber, 10 top and bottom of wall anchors. Engineered and tested to be the strongest anchoring system top to bottom.
8400 carbon fiber wall repair kit
|
1 Gallon Emecole 100 & 800 High Pressure Polyurethane 100/800 is specially formulated for use in large scale jobs requiring high pressure injection.
Emecole 100 & 800 Polyurethane
|
EmeSeal Drain Fabric Poly Combo Liner is our combined drain fabric and white polyethylene floor liner fused together, specifically for crawl space floors.
|
Category List
